CSU Modular Student Accommodation

Stage 3 - Project Value $9.3M

o    Built in Brisbane Factory and commissioned in site in Port Macquarie.

o    Built in late 2020 and commissioned and Handed over in Feb 2021 (8 Months  Elapsed)

o    The CSU Student accommodation project was the design and manufacture of a ‘True’ modular class 3 type construction building in a 3 story configuration. Stages 3 Consisted of 2 accommodation buildings However these building differed in design from the previous stages.

o    The accommodation Modules measured 10.6m long x 3.0m wide and with 2 studios per module. There were 16 modules per floor and 3 floors (48 modules total) to create one accommodation block. This project had 96 over size loads built in Brisbane and transported to Central NSW again utlising our preferred transport contractor who specialises in large volume modular haulage – John Sams Transport. The transport contract for this project was over $300K (refer Appendix A for design Typology including and Images of the completed development)

o    The Modular buildings utilised light weight construction to achieve an FRL of 90/90/90 and again incorporated a comprehensive Fire Control System interconnected through the main Fire Instrument Panel (FIP)

Each building (including every door) is controlled through an Electronic Access Control System incorporating the latest in swipe technology and incorporated Energy Saving Devices (ESD) in every room.